Xantrex Technology Inc.
Headquarters
8999 Nelson Way
Burnaby, British Columbia
Canada V5A 4B5
800 670 0707 Toll Free
604 420 1591 Fax
5916 195th Northeast
Arlington, Washington
USA 98223
800 446 6180 Toll Free
360 925 5144 Fax
www.xantrex.com© 2003 Xantrex Technology Inc. All rights reserved. Xantrex is a trademark of Xantrex International. Part Number 970-0075-01-01 Rev. A. Printed in Canada
SW Plus 2524 & SW Plus 2548
Xantrex Sine Wave Plus Inverter/Charger
Power Independence in a Small Package
Designed to provide homes with a completely independent power supply, the SW Plus 2.5 kW
Inverter/Charger combines an inverter, battery charger and dual transfer switch in one package.
Available in 24 and 48 volt versions, it offers continuous power output of 2.5 kW. The SW Plus
provides AC power for household appliances and DC power to charge batteries. As part of an
off-grid renewable power system, it converts all forms of renewable energy into utility grade
household power.
The SW Plus can also be used as part of a backup power system to automatically provide AC power
when utility power fails. For supplementary power, the inverter/charger can be programmed
to automatically start and stop a generator, based on user needs. To save on utility bills,
the SW Plus can also be programmed to switch to battery power from utility power during
peak-rate periods. The SW Plus is not designed to sell power to the grid.
Product Features
2.5 kW continuous output of sine wave power (to 40º C)
Huge surge (inrush current) capacity – up to 4 times rated output for starting large loads
High capacity, multi-function battery charger provides accurate four stage re-charging and
maintenance
Smart Energy Management system controls utility and/or generator usage
Non Volatile memory provides the SW Plus with the ability to save customized settings
FCC Part B compliant means less potential interference with radio and telephone equipment
Energy efficient with 95% peak efficiency and <20 watts of idle current (<2 watt in search mode)
Options
Expandable – Two SW Plus inverters may be stacked for increased output in 120/240 VAC
configuration (5 kW total)
Matching AC and DC conduit boxes for code compliant installation
Generator Start Module used to control two and three wire generators
Auxiliary Load Module used to automatically start and stop auxiliary loads such as fans based
on programmable voltage parameters
Inverter Communications Adapter allows for remote connection to SW Plus via PC
An additional Inverter Control Module (ICM built-in to SW Plus) may be installed for remote
operation and monitoring of inverter/charger
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals